How To Flash Samsung Stock Rom Firmware Using Odin

There are instruction to Flash Samsung Stock Rom (Firmware) using Odin Flash Tool (Odin Tool) on windows computer.

Requirement: Your Android Smartphone Should have been at-least 40-50 percent of battery to perform flashing process.

Flash Samsung Stock ROM Firmware Using Odin Flash Tool:

Step 1: Download and Install Samsung USB Driver on your Computer. If you have already install Samsung USB Driver then you can Skip this step.

Step 2: Download Samsung Stock Rom Firmware of Your Device (If you have already download your samsung device firmware then ignore it) and Extract it in your Computer after extracting you will see this type files.

Step 3: Now Power Off Your Samsung Device.

Step 4: Boot Your Samsung Device into Download Mode. Press and Hold Volume Down Key, Home Key and Power Key, When Your Device Vibrates, Release Power Key While keep Holding the Volume Down Key and Home Key.

Step 5: In the Download mode you will be able to see a Warning Yellow Triangle Sign. In This situation you have to press the Volume up key to continue.

Step 6: Now Press Volume Up Key to Enter Download Mode , Which has a green robot Figure and Show "Downloading.... Do not turn off target !!"

Step 7: Download Odin and extract on your computer. After extracting you will be able to see the following files in the screen shot image.

Step 8: Now Click Odin3_v3.11.1.exe and Open it. When odin Opened then connect your phone to the computer.

Step 9: Once you have connected the your smart phone to the computer, Odin will automatically detected the device and show "Added" message at the lower-left panel.

Step 10: Once your device detected by Odin, then click on the "AP" button and select the "tar.md5" file which have you extracted in Step #2.

Step 11: Now, click on the "Start" button in Odin to begin the flashing process.

Step 12: Once you see, the Green Pass Massage then you can remove the USB cable from the device (In this process, your device will restart automatically).

Step 13: Your Samsung Device will now stuck at boot (boot loop). Now, you have to boot into Stock Recovery Mode, To Enable Stock Recovery mode: Press and Hold Volume UP Key, Home Key, Power Key. When your phone vibrates Leave the Power Key but Keep holding the Volume UP Key and Home key. You will boot into the Recovery Mode.

Step 14: In Recovery Mode, Wipe Data/factory reset in your smart phone.

Step 15: Once cache Data is cleared in your smart phone, then Select Restart phone Now from the recovery menu.

Step 16: Now, your Samsung Device Will restart without any issue with the Stock Rom you download. Let's you enjoy

Note:

[*] Please take a backup of your personal data, Before flashing the Your Samsung Smart Phone. So, that you can easily restore your personal data on your Smartphone and Tablets

Readme Once:

[Stock Rom:] If you want to download the official Stock Rom (firmware) for Other Smartphone then click Stock rom page.

[USB Driver:] If you want to download Usb Driver then click here.

[Flash Tool:] If you want to download Other tool then click here.