How To Flash Stock ROM Firmware Using Sony Mobile Flash Tool

There are instruction to Flash Stock Rom or any custom Rom using Sony Mobile Flash Tool (Sony Flash Tool) on windows computer.

Requirement: Your Android Smartphone Should have been at-least 40-50 percent of battery to perform flashing process.

Flash Stock ROM Firmware Using Sony Mobile Flasher Tool

Step 1: Now get started, first of all you download the USB driver and install it on your computer. Once done, download the stock firmware file on your computer. Once done, extract the zip file on your computer.

Step 2: Now download Sony Mobile Flasher and install it on your computer. Once done, launch its Window.

Step 3: Now open the “Sony Mobile Flasher window”. click on the “Flash” button..

Step 4: Now you will be asked to choose the Bootmode. Choose “Flashmode” as bootmode and click “Ok“.

Step 5: Next, in the Firmware Selector window, click on […] button and load the firmware.

Step 6: After the firmware file is loaded, click on the “Flash” button. Once done, switch off your Sony device.

Step 7: Now while pressing the Volume Down button, connect your device to the computer using the original USB data cable.

Step 8: Once your device is successfully connected to the computer, the flashing process will start automatically, and it will take few minutes to get completed.

That’s it. You have successfully flashed stock ROM firmware on your Android smartphone device. Once done, unplug your device from the computer and enjoy the native Android experience again.


If you encounter any issues while following this firmware installation tutorial, do let me know via comments.